Fri, 07 Aug 2026 10:21:47 +0000 <![CDATA[Nieuwste producten van Vervangingsmarkt specialist in onderdelen]]> https://www.vervangingsmarkt.com/ <![CDATA[VSH 4244141 Key and spacer outdoor tap]]> This product is a grey plastic key with ridges in the hole, intended for various vsh outdoor taps. The wrench is supplied including a grey spacer bushing.

Key Highlights

  • Grey plastic wrench with ridges in the hole
  • Supplied including grey spacer bushing
  • Suitable for various vsh outdoor taps

Technical Specifications

Brand Vsh
Item number 4244141
Color Gray
Material Plastic
Included Gray spacer bushing

Application

The key and the accompanying spacer bushing are intended for operating various vsh outdoor taps.

]]> Fri, 07 Aug 2026 10:21:45 +0000 <![CDATA[Quooker 31.651.00 Service set Pro3 b qrv]]> The Quooker service set Pro3 B QRV with article number 31.651.00 is a replacement set used for connecting a Quooker Pro3 B. This set is suitable for connecting a Pro3 with a bellows. If the existing QRV has become defective, it can be replaced with this set.

The QRV M19 features a sticker with the number 31.406.00, with the indication aic e 46 10979 below it. The cap on the QRV is red in color and contains the text close <- -> open. In terms of connections, the part features one connection on each side (two in total) and one connection at the bottom. There are two Allen key caps on the back of the QRV.

Key Highlights

  • Suitable for connecting a Quooker Pro3 with bellows.
  • Serves as a replacement for a defective QRV.
  • Red cap featuring the text close <- -> open.
  • Equipped with two side connections (one on each side) and one bottom connection.
  • Provided with two Allen key sockets on the back.

Technical Specifications

Brand Quooker
Item number 31.651.00
Basic information Service set Pro3 B QRV
Sticker information QRV M19 31.406.00 / aic e 46 10979
Size / Type dn8
Maximum temperature (T max) 80 degrees
Inlet pressure (P in) 16 bar
Outlet pressure (P out) 3.1 bar

Application

This service set is used for connecting a Quooker Pro3 with bellows, when the existing QRV has become defective and needs to be replaced.]]> Thu, 06 Aug 2026 10:22:44 +0000 <![CDATA[Dornbracht 9029031210090 Perlator]]>

Key Highlights

  • Flat plastic aerator.
  • Suitable for situations where the old aerator is clogged or calcified.
  • Located at the end of the faucet spout.
  • Can be disassembled with wrench 0430090760090.

Technical Specifications

Brand Dornbracht
Item number 9029031210090
Product type Perlator
Material Plastic
Shape Flat

Application

This aerator is intended for various Dornbracht taps and is fitted at the end of the spout. You need this replacement when the old part has become calcified or clogged. Disassembly must be performed using wrench 0430090760090.]]> Thu, 06 Aug 2026 10:22:42 +0000 <![CDATA[Lanesto 240039 Unico Luxury Stainless Steel Drain Set]]>

Key Highlights

  • Equipped with the Luxe basket strainer with large knob
  • Connection size of 40 mm
  • Suitable for various Lanesto sinks

Technical Specifications

Brand Lanesto
Item number 240039
Connection size 40 mm
Type basket plug Luxury basket strainer with large knob

Application

This basket strainer set can be used for various sinks from the brand Lanesto.

]]> Wed, 05 Aug 2026 10:31:50 +0000 <![CDATA[Dornbracht 9090031310190 Upper part right-closing incl. filter 1/2]]> This Dornbracht internal mechanism consists of a right-closing top section equipped with a 1/2" filter. The product is supplied including a clamping nut and an adapter, ensuring that the mechanism is easy to install.

Key Highlights

  • Right-closing top section including 1/2" filter.
  • Equipped with a clamping nut and adapter for easy installation.

Technical Specifications

Brand Dornbracht
Item number 9090031310190
Type Interior (top part right-fitting)
Filter size 1/2"
Inclusive Tension nut, adapter and filter

Application

The internal mechanism is easy to install thanks to the included adapter and tension nut.

]]> Thu, 30 Jul 2026 11:44:38 +0000 <![CDATA[Bongio 9840 movement 25mm]]>

Key Highlights

  • Bongio cartridge movement (item number 9840)
  • Diameter of 25 mm (x o'clock)
  • Side fitted with a rubber ring
  • Bottom fitted with 2 lugs, 2 holes with a rubber seal and 1 recessed hole

Technical Specifications

Brand Bongio
Item number 9840
Type Cartouche interior
Diameter 25 mm
Version X o'clock, rubber ring on side, bottom with 2 lugs, 2 holes with rubber and 3rd hole recessed

Application

This part is used as cartridge insert of the brand Bongio with article number 9840.

]]> Wed, 29 Jul 2026 10:38:43 +0000 <![CDATA[Lanesto 881022 Rubber ring for Urban basket plug]]> This item is a rubber ring for the Lanesto Urban basket plug or basket strainer. The rubber ensures the basket plug seals properly again.

When acids or corrosive substances are poured down the sink, the rubber around the basket plug can deform and often develop ridges. As a result, the plug no longer seals properly. With this rubber ring, you can easily replace the worn or deformed one, so your basket plug seals watertight again.

Key Highlights

  • Fits the Lanesto Urban basket plug and basket strainer.
  • Restores a proper seal on the basket plug.
  • Replaces rubber deformed by acids or corrosive substances.
  • Also fits the coloured PVD basket plugs from Lanesto and Reginox.

Technical Specifications

Brand Lanesto
Item number 881022
Outer diameter 54 mm
Inner diameter 33 mm
Thickness 5 mm

Application

This rubber ring is used on the Lanesto Urban basket plug/basket strainer to replace the old rubber when it has deformed and no longer seals properly. Thanks to its dimensions (Ø54mm outer, Ø33mm inner, 5mm thick), the ring also fits the coloured PVD basket plugs from Lanesto and Reginox, letting you restore the seal quickly and yourself.

Veelgestelde vragen

What are the dimensions of the Lanesto 881022 rubber ring?

This rubber ring has an outer diameter of 54mm, an inner diameter of 33mm and a thickness of 5mm. With these dimensions, the ring fits precisely on the Lanesto Urban basket plug or basket strainer, so you can easily restore the seal without replacing the entire basket plug.

Does this rubber ring also fit Reginox basket plugs?

Yes, this rubber ring is not only suitable for the Lanesto Urban basket plug, but also fits the coloured PVD basket plugs from Reginox. To be sure, always check that the diameters of your basket plug match Ø54mm outer and Ø33mm inner.

Why do I need to replace the rubber ring on my basket plug?

When acids or corrosive substances are poured down the sink, the rubber around the basket plug can deform and develop ridges. As a result, the plug no longer seals properly and water can keep leaking. Replacing the rubber ring fully restores the seal.

How do I fit the new rubber ring onto my basket plug?

First remove the old, deformed rubber ring from the basket plug or basket strainer and clean the plug thoroughly. Then slide the new ring into the same spot so it fits snugly. Thanks to the exact Ø54/33mm fit, the ring immediately restores a watertight seal.

Is this rubber ring suitable for my Lanesto basket strainer?

Yes, this rubber ring is specifically designed for the Lanesto Urban basket plug and basket strainer. Before use, always compare the dimensions of your current rubber with Ø54mm outer diameter, Ø33mm inner diameter and 5mm thickness to ensure a proper fit.

]]> Thu, 23 Jul 2026 10:06:18 +0000 <![CDATA[Horus 50141PB MONTMARTRE Polished Bronze]]> The Horus Montmartre is a classic 2-hole sink mixer tap supplied without a drain. The tap features a variable center distance of 200 ± 55 mm, offering flexibility for installation on the sink. This model is part of the classic Horus collection, utilizing traditional French craftsmanship and noble materials.

This version corresponds to item number 50141PB in the color Polished Bronze (Glimmend Bron / Lacquered Polished Verdigris Brass PB). The source data also explains that a nickel finish has a characteristic silver effect, is yellower in tone than standard chrome, and is reinforced by a second nickel bath for higher resistance to limescale.

Key Highlights

  • Collection: Montmartre (Classique)
  • Type: 2-hole kitchen faucet / sink mixer tap
  • Operation: Version with mannettes
  • Finish: Polished Bronze (Glossy Bronze) Lacquered Polished Verdigris Brass PB
  • Supplied without drain (sans vidage)
  • Design and manufacture based on French craftsmanship

Technical Specifications

Brand Horus
Item number 50141PB
Product type 2-hole sink mixer tap
Style Classic
Color Polished Bronze
Center distance Variable 200 ± 55 mm
Drain Without drain

Application

This kitchen faucet is suitable for installation on a sink with two tap holes, taking into account the variable center distance between the connection points of 200 ± 55 mm.

]]> Thu, 23 Jul 2026 10:06:15 +0000 <![CDATA[Dornbracht 9018405510090 Greep voor toiletborstelgarnituur 100 x 311 x 100 mm]]> Wed, 22 Jul 2026 13:46:39 +0000 <![CDATA[Kerox K25-OP K-25 OP internal mechanism 25mm]]> This Kerox faucet insert with article number K25-OP is a specific technical component for faucets. The insert has a diameter of 25mm and is marked "Kerox k-25 op". The part is equipped with a handle made of steel.

The design of the insert features specific characteristics for proper connection. At the bottom of the insert, there are three holes fitted with a rubber ring, along with two lugs. At the top, near the collar of the insert, there is also a rubber ring. The side of this inner mechanism is not fully closed and features two openings.

Key Highlights

  • Features the imprint "Kerox k-25 op".
  • Equipped with a steel handle.
  • Diameter of 25mm.
  • Bottom features 3 holes with a rubber ring and 2 lugs.
  • Top features a rubber ring on the collar.
  • Side not fully closed with 2 openings.

Technical Specifications

Property Specification
Brand Kerox
Item number K25-OP
Product type Crane interior
Diameter 25mm
Handle material Steel
Housing imprint Kerox k-25 op

Application

This product serves as a replacement valve insert for valves suitable for an insert with a diameter of 25mm and the associated technical features such as the steel handle and the specific connections on the bottom and side.

]]> Fri, 17 Jul 2026 14:50:33 +0000 <![CDATA[Prosteel PS996334 Aerator for outdoor tap and filling tap]]> The Prosteel aerator with item number PS996334 is a functional part for plumbing connections. This white plastic aerator features a brass interior and comes complete with rubbers. This part serves as a replacement whenever there's a leak at the aerator of a tap.

Aerator Guide

Key features

  • Made from white plastic with a sturdy brass interior
  • Comes with matching rubbers for a proper seal
  • Ideal for fixing leaks at the aerator
  • Fits many outdoor taps, including the VSH Polaris

Technical specifications

Property Specification
Brand Prosteel
Item number PS996334
Base material Plastic
Interior material Brass
Brass valve diameter 13,3 mm
Outer diameter black ring 16,5 mm
Diameter white exterior (on thread) 14,5 mm
Hex key size 16 mm

Check valve design

The brass check valve has a flat finish on top. The bottom features a protruding triangle with a height of 7 mm. To make the part easy to (dis)assemble, the hex has a key size of 16 mm.

Application

This aerator is suitable for use in various VSH outdoor taps, including the VSH Polaris, as well as washing machine taps. When a VSH outdoor tap leaks at the aerator, this product offers the right solution to fix the leak.

Easy to replace

Noticing water leaking at the aerator of your outdoor tap or fill valve? You don't need to replace the entire tap right away. With the Prosteel PS996334, you only replace the worn part, making your tap watertight again. Thanks to the brass interior, the aerator is durable and built to withstand regular use, while the included rubbers ensure a proper seal right away. This way, you can quickly and affordably fix it yourself, without needing a plumber.

Veelgestelde vragen

Does the Prosteel PS996334 fit the VSH Polaris outdoor tap?

Yes, the Prosteel PS996334 is suitable for many outdoor taps, including the VSH Polaris. If your VSH Polaris is leaking at the aerator, this part is a suitable replacement that lets you fix the leak yourself without replacing the entire tap.

What is the diameter of the brass valve in this aerator?

The brass valve in the Prosteel PS996334 has a diameter of 13,3 mm. Together with the rubbers, this valve ensures a proper seal inside the aerator, preventing leaks at your outdoor tap or fill valve.

What key size do I need to install the aerator?

To install the Prosteel PS996334, you'll need a 16 mm key. This fits the hex on the aerator, so you can easily tighten or loosen the part during replacement.

How do I identify the correct installation direction of the check valve?

The brass check valve of the PS996334 has a flat finish on top, while the bottom features a protruding triangle with a height of 7 mm. This shape makes it easy to identify which side goes up and which side goes down during installation.

What are the outer dimensions of the Prosteel PS996334?

The black ring of the aerator has an outer diameter of 16,5 mm, while the white plastic exterior measures 14,5 mm on the thread. These dimensions are important to check to make sure the part fits your outdoor tap or fill valve.

Can I replace this aerator myself without a plumber?

Yes, thanks to the included rubber and compact size, you can easily replace the Prosteel PS996334 yourself using a 16 mm key. You don't need a plumber; just follow the aerator guide on our site for step-by-step instructions.

]]> Fri, 17 Jul 2026 14:50:31 +0000 <![CDATA[Damixa 487548800 Rotating hand shower holder]]>

Key Highlights

  • Suitable for inserting a shower head.
  • Easy wall mounting.
  • Equipped with a swivel head for use as a fixed support.
  • Finished in the color matte bronze PVD.

Technical Specifications

Brand Damixa
Item number 487548800
Color matte bronze pvd
Mounting Wall mounting

Application

This holder is suitable for wall mounting in the shower or bathroom and serves as a support in which the hand shower can be placed and rotated.

]]> Wed, 15 Jul 2026 14:45:58 +0000 <![CDATA[Damixa 487548700 Rotating hand shower holder]]>

Key Highlights

  • Simply slide the shower head into the holder.
  • Suitable for wall mounting.
  • Equipped with a swivel head that serves as a fixed support for the hand shower.
  • Stylish finish in the color matte copper PVD.

Technical Specifications

Feature Value
Brand Damixa
Item number 487548700
Color matte copper pvd

Application

The holder is mounted to the wall to slide your hand shower into. Thanks to the swivel head, this holder can be used as a stable support in which the shower head remains in place during showering.

]]> Wed, 15 Jul 2026 14:45:56 +0000 <![CDATA[Damixa 487547900 Rotating hand shower holder]]>

Key Highlights

  • Suitable for sliding in your shower head
  • Intended for wall mounting
  • Rotatable head allowing it to function as a fixed support
  • Made in matte brass PVD

Technical Specifications

Feature Specification
Brand Damixa
Item number 487547900
Color matte brass PVD

Application

This holder is mounted to the wall and serves as a support in which the hand shower can be placed and rotated.

]]> Wed, 15 Jul 2026 14:45:54 +0000 <![CDATA[Damixa 487546100 Rotating hand shower holder]]>

Key Highlights

  • Suitable for inserting a shower head.
  • Easy to mount to the wall.
  • Equipped with a swivel head, serving as a fixed support for the hand shower.
  • Finished in the color matte black.

Technical Specifications

Brand Damixa
Item number 487546100
Color matte black

Application

This holder is intended for wall mounting. After installation, slide the hand shower into the holder. Thanks to the swivel head, the holder can be used as a fixed support in which the shower head can remain in place.]]> Wed, 15 Jul 2026 14:45:51 +0000