Replace Franke Mondial parts

Franke Mondial spare parts replacement

replace internal mechanism
  • Do you want to replace the internal mechanism of a Franke Mondial tap? Then I'm happy to help you further. Today we're replacing the internal mechanism of this tap
    We need the following parts: a new internal mechanism, 30Cr-V socket wrench and a 2.5mm Allen key. Let's get started quickly
    1. Turn the handle down, now you'll see a small screw slot
    2. Now you can loosen the screw with the 2.5mm Allen key
    3. Now remove the handle
    4. Unscrew the dust cap by hand
    5. With a socket wrench you can unscrew the brass nut, if you don't have a socket wrench use a Bahco or a water pump pliers
    6. Now you can replace the internal mechanism
    7. Make sure the new internal mechanism fits in properly
    8. Now screw the brass nut back on
    9. Place the dust cap back on
    10. Place the handle back on
    11. Tighten the handle back with the screw
    12. Now you have replaced the internal mechanism of your Franke Mondial tap!

  • replace boiling water internal mechanism
    Do you want to replace the boiling water internal mechanism of a Franke Mondial tap? Then I'm happy to help you further. Today we're replacing the boiling water internal mechanism of this tap.
    We need the following parts: a new boiling water internal mechanism, flat screwdriver, ratchet, socket wrench, pointed pliers and a 2mm Allen key. Let's get started quickly
    1. Turn the handle forward, now you'll see a small screw slot.
    2. Unscrew the screw with the 2mm Allen key
    3. Now you can unscrew the cap from the handle
    4. If it doesn't work by hand, use cleaning gloves or give it light taps with a rubber hammer
    5. Use the screwdriver to loosen the internal screw
    6. Now remove the handle and remaining parts
    7. Place a flat screwdriver between the slot and pry the spring off
    8. Remove the plastic cap
    9. Remove the disc with pointed pliers. Place the pointed pliers in the two circles and twist it out
    10. Use the ratchet and socket wrench to remove the boiling water internal mechanism
    11. Now you can replace the internal mechanism
    12. Make sure you secure the new internal mechanism well with the ratchet and socket wrench
    13. Screw the disc back on with the pointed pliers
    14. Place the plastic cap back on
    15. Place the spring with casing on properly. Make sure the spring is in the correct hole so your handle turns properly.
    16. Now place the remaining parts with the handle on
    17. Screw the screw back in
    18. Now you can screw the cap of the handle back on
    19. Finally screw the small screw back on with the Allen key

Do you want to replace the aerator of a Franke Mondial tap? Then I'm happy to help you further. Today we're replacing the aerator of this tap

We need the following parts: a new aerator. Let's get started quickly

  1. If the aerator needs to be removed from the spout, it's wise to give a few taps against the bottom of the aerator first. This startles the aerator and makes it easier to disassemble later.
  2. Next, make sure that all the holes on the edge of the aerator are clean.
  3. Then you unscrew the aerator with the aerator wrench
  4. Now you can replace the aerator incl. sleeve or just the loose strainer.
  5. It sometimes happens that the grey plastic part, which should remain in the spout, comes out when unscrewing it.
    See here the instructions on how to remove this
  6. This can usually be removed by holding the grey plastic in your hand, then tapping the top (visible part) of the aerator with a hammer.
  7. You can also soak it in cleaning vinegar and then rinse it off, or soak it in boiling water so it gets a temperature shock.
  8. After that, hold the plastic firmly by hand or carefully with a water pump pliers and then use the wrench to unscrew the top.
  9. Now you can remove the aerator from the sleeve and replace it.

Do you want to replace the spout of a Franke Mondial tap? Then I'm happy to help you further. Today we're replacing the spout of this tap

We need the following parts: a new spout and a 2mm Allen key. Let's get started quickly

  1. On the back of the tap you'll find a screw.
  2. Loosen the screw with the 2mm Allen key
  3. Now carefully remove the spout
  4. Now you can replace the spout
  5. When you've placed the new spout on, you can tighten it with the screw
  6. Now you've replaced the spout perfectly