Excenter 15 Titus P16

The Excenter 15 Titus P16 has a diameter of 15mm and a height of 12mm. This model is specifically designed for a shelf with a thickness of 16mm. When ordering, pay close attention to these measurements to make sure the excenter fits precisely into the drilled hole in your shelf.

A Titus excenter is widely used in the shelves of built-in cabinets to secure the shelf firmly to the cabinet wall. The excenter is drilled into the shelf and works together with a connecting pin. This keeps the shelf firmly in place, even with regular use.

When taking apart an old cabinet, the hook on the underside of the excenter often breaks off. This usually happens because the shelf and excenter have been stuck together for years and need to be forced apart. Fortunately, you can easily replace the excenter with a new one, such as the Excenter 15 Titus P16.

You can recognise the Excenter 15 Titus P16 by the cross-head with the Titus brand name on top and the characteristic hook on the underside. Also always check the diameter (15mm) and the thickness of your shelf (16mm), so you can be sure this is the right model for your cabinet.

Yes, the Excenter 15 Titus P16 is easy to fit yourself. You drill the excenter into the shelf at the correct diameter and then tighten it with a cross-head screwdriver. You don't need any special tools, and the job is done within a few minutes.