Wie erkennst du den Franke Schlauch 133.0062.362 genau?

Du erkennst den Franke Schlauch 133.0062.362 an der aufgedruckten Artikelnummer auf dem Schlauch selbst, der spezifischen Länge und dem Durchmesser sowie der Art des Kupplungsstücks an beiden Enden. Kannst du die Nummer nicht mehr ablesen? Dann vergleiche Merkmale wie Dicke und Anschluss mit den Fotos in dieser Anleitung, um sicherzugehen, dass du das richtige Teil vor dir hast.

Passt dieser Schlauch auf die Franke Neo Armatur?

Ja, der Franke Schlauch 133.0062.362 wird unter anderem in der Franke Neo Armatur verwendet. Prüfe im Zweifel immer die Artikelnummer auf deinem aktuellen Schlauch und vergleiche Länge und Kupplungsart, bevor du bestellst, damit du sicher das richtige Ersatzteil zu Hause hast.

Warum ist mein neuer Schlauch schwarz, obwohl der alte grau war?

Das ist ganz normal: Der Franke Schlauch 133.0062.362 wurde früher in Grau geliefert, heute ist die neue Ausführung schwarz. Form, Maß und Anschluss sind identisch geblieben, also kannst du die schwarze Version problemlos als Ersatz für deinen alten grauen Schlauch verwenden. Hersteller wechseln gelegentlich den Lieferanten, da dieser ältere Schlauchtyp in neueren Armaturen und Modellen von Franke nicht mehr verwendet wird.

Kann ich den Schlauch selbst austauschen, ohne Handwerker?

Ja, du kannst den Franke Schlauch 133.0062.362 problemlos selbst austauschen. Du brauchst nur eine Wasserpumpenzange oder einen Maulschlüssel und ein paar Minuten Zeit. Schalte immer zuerst die Wasserzufuhr ab, folge den Schritten in dieser Anleitung und prüfe nach der Montage, ob alles dicht angeschlossen ist ohne Undichtigkeiten.

Franke Hose 133.0062.362 Identification and Replacement

Not sure if the Franke hose 133.0062.362 is the right replacement hose for your tap or appliance? This guide shows you how to identify the hose by its specific features, such as the connector size, length, and coupling type. This hose is used in, among others, the Franke Neo tap. Note: the hose used to be grey, but the current version is black — that doesn't mean you've got the wrong part. This way you can be sure you're ordering the correct part before you get started. You'll also find a step-by-step guide to replacing the hose yourself, no plumber needed. With the right prep and a few simple steps, your tap or appliance will be working again within fifteen minutes.

Franke Hose 133.0062.362: Identify and Replace It Yourself — No Plumber Needed

What You Should Know Before You Start

The Franke hose 133.0062.362 is a specific pull-out hose found in various Franke kitchen taps, including the Franke Neo tap. Before ordering a new hose, it's important to carefully check the features of your current one: the part number, length, diameter, and connector type (straight or angled). Also keep in mind that the hose's colour has changed: it used to come in grey, but the current version is black. So if you have a grey hose and receive a black replacement, that's completely normal and not a mistake. Also take a close look at the shape of the couplings, so you can be sure you're getting the right replacement. Working with water or a connected appliance? Always shut off the water supply first before you begin.

Features of the Franke hose 133.0062.362 with printing and coupling clearly visible

What Do You Need?

New Franke hose 133.0062.362 (note: now black instead of grey)
Water pump pliers or an open-end wrench
A bucket or cloth for any leftover water
A flashlight (handy for working under the sink)

Step by Step

Shut off the water supply completely before loosening anything.
Get under the sink or tap and locate the existing hose, for example on your Franke Neo tap.
Compare the features of the old hose with the Franke hose 133.0062.362: check the length, diameter, and coupling type. Got a grey hose? You'll now receive the new black version, which is completely fine.
Loosen the couplings on the old hose using water pump pliers or a wrench. Keep a cloth or bucket handy for any leftover water.
Remove the old hose completely and check the connection points for dirt or limescale.
Fit the new Franke hose 133.0062.362 and tighten both couplings firmly, but don't overtighten.
Turn the water supply back on and check the connections for leaks.

Franke hose 133.0062.362 correctly installed after replacement

Frequently Asked Questions

How exactly do you identify the Franke hose 133.0062.362?

You can identify the Franke hose 133.0062.362 by the part number printed on the hose itself, its specific length and diameter, and the coupling type at both ends. Can't read the number anymore? Then compare features like thickness and connector shape with the photos in this guide to make sure you've got the right match.

Does this hose fit the Franke Neo tap?

Yes, the Franke hose 133.0062.362 is used in, among others, the Franke Neo tap. If you're unsure, always check the part number on your current hose and compare the length and coupling type before ordering, so you can be sure you're getting the right part.

Why is my new hose black when the old one was grey?

That's completely normal: the Franke hose 133.0062.362 used to come in grey, but the current version is black. The shape, size, and connectors have stayed exactly the same, so you can use the black version without any issues as a replacement for your old grey hose. Manufacturers occasionally switch suppliers because this is already an older hose type no longer used in newer Franke taps and models.

Can you replace the hose yourself without a plumber?

Yes, you can easily replace the Franke hose 133.0062.362 yourself. All you need is water pump pliers or a wrench and a few minutes of your time. Always shut off the water supply first, follow the steps in this guide, and check after installation that everything is properly connected without any leaks.