- Home
- Faucet Parts
- Faucet parts by brand
- Franke spare parts
- Franke Mondial 119.0474.417 spare parts
Description
Looking for parts for the Franke Mondial 119.0474.417 boiling water tap with angled spout? Here you'll find the right part based on the diagram and part number. Franke numbers 1020012 - 1120012, Twist square full stainless steel version.
- Filter: replace this once a year. The filter is located in the cabinet under the tap.
- Internal unit no. 2: is your tap leaking on the left side near the handle? Then you'll need to replace the internal unit with part number 2 on the diagram.
- Aerator no. 4: if the aerator is dirty or defective, replace it with no. 4. Before installing, be sure to read the instructions supplied with the aerator carefully, as it can sometimes be tight to fit.
- Internal unit no. 1: if the hot/cold water handle of your boiling water tap is leaking, you'll need a new internal unit (no. 1).
Not sure exactly which part you need? Compare the part number on your diagram with the parts listed above, so you can be sure you're ordering the right one.
Frequently asked questions
My Franke boiling water tap is leaking on the left side near the handle, what should I do?
If your tap is leaking on the left side near the handle, replace the cartridge identified as part number 2 in the diagram. This cartridge is specifically made for the Franke Mondial 119.0474.417 and can easily be replaced yourself without needing a technician.
When should I replace the aerator on my Franke boiling water tap?
If the aerator on your tap is dirty or defective, replace it with part no. 4. Always read the instructions included with the aerator carefully before fitting, as it can sometimes be stuck. This will help you avoid damage during installation.
My hot/cold water handle is leaking, which part do I need?
If the hot/cold water handle on your Franke Mondial 119.0474.417 is leaking, you will need a new cartridge, indicated as part number 1 in the diagram. This cartridge allows you to fix the leak easily yourself, without having to replace the entire tap.
Do these parts fit all Franke Mondial taps?
These parts are specifically intended for the Franke Mondial 119.0474.417 with angled spout, identifiable by Franke numbers 1020012 - 1120012 in the Twist square full stainless steel finish. Always check the part number on your own tap or diagram before placing an order.
My Franke Mondial tap is leaking from the spout. Which cartridge should I replace?
If a Franke Mondial tap is leaking from the spout, this may be caused by either the left or right cartridge. Since it is not possible to determine which side is the cause without disassembly, it is recommended to replace both cartridges. This ensures the problem is fully resolved.
Specifications
Franke Mondial 119.0474.417 spare parts
Order the parts for the Franke Mondial 119.0474.417 boiling water tap with angled spout here. Franke numbers 1020012 - 1120012, Twist square full stainless steel version.
Bijpassende onderdelen
You can contact us and ask your question via the options below.
You can contact us and ask your question via the options below.
What do you think of the article?
