Quooker CUBE HF Water Filter QUFILTCUBE Hollow Fiber Replacement Filter (Annual)

You replace the filter as soon as the light on your Quooker Cube's cold water tank flashes red and you hear a beep. Quooker also recommends replacing the filter every year, even without a signal, so bacteria keep getting removed from the water and water quality stays optimal.

The Quooker Cube HF water filter lasts for approximately 3500 litres of water before it needs replacing. Depending on your water usage, this usually works out to a lifespan of around 12 months, after which you replace the filter again.

This QUFILTCUBE filter is suitable for Quooker Cube models supplied before December 2021. You can recognise this filter by the 2 rubber rings on the connection. You can identify the CUBE1 by its white top with a sliding lid, under which the filter is fitted.

First you detach the old CUBE cartridge set by turning it anti-clockwise. Then you screw in the new CUBE cartridge clockwise and place the cartridge holder back into the cube. After installation, you press the button for 5 seconds to turn off the replacement signal.

After fitting the new filter, you press the button on your Quooker Cube for 5 seconds. This turns off the replacement signal, so you can enjoy delicious cooled or sparkling water again without a fault notification.

Yes, this is the original Quooker Hollow Fiber filter QUFILTCUBE, specially developed for the CUBE1 reservoirs. By using an original filter, your Quooker Cube's water quality stays optimal and you avoid faults caused by ill-fitting parts.