Prosteel PSB001 set of inserts cold

You use the Prosteel PSB001 valve inserts to revive a rinse tap. This set fits many commercial rinse taps mounted at the bar, such as glass rinsers and rinse taps, and gets your tap working properly again without having to buy a new tap.

The set consists of 2 valve inserts, 2 knobs, and 2 blue caps that you can attach to the knobs. With this you can revive two cold water taps or fully renew one tap, including the control and recognizable blue color coding. If you have a hot and cold tap, these can also be used, only your hot side will close in the opposite direction.

This valve insert has a thread with a diameter of 15mm. Pay close attention to this size before ordering, since not every rinse tap has the same thread. Measure your current insert to make sure you order the correct size.

This set fits most bar glass rinsers and rinse taps, but not every brand or model. Always check the thread diameter (15mm) before ordering, so you can be sure the part is suitable for your tap.

Yes, you can easily replace the valve inserts yourself. You unscrew the knob of the tap, remove the old valve insert, and put the new valve insert in place. Then you reattach the knob and the blue cap, without needing a technician for this.